Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13597211
- Product Categories
- Friendly Links
- home > Supply > Teflon PTFE membrane film specifications, Tianjin three (certified), Shijiazhuang PTFE
Information Name: | Teflon PTFE membrane film specifications, Tianjin three (certified), Shijiazhuang PTFE |
Published: | 2014-12-07 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Teflon PTFE membrane film specifications, Tianjin three (certified), Tianjin, Shijiazhuang PTFE provided by three plastic Limited. Plastic Co., Ltd. Tianjin three (www.tjzssj.com) is specialized in "nylon, PTFE, plastic, insulation material," the enterprise, the company of "honesty, hard service" concept, to provide you with the most quality products and services. Welcome to inquire! Contact: Manager Zhou. High temperature - use operating temperature up to 250 ℃. Low temperature - with good mechanical toughness; even if the temperature drops to -196 ℃, but also to maintain a 5% elongation. Corrosion - for most chemicals and solvents can tetrafluoride temperature PTFE plate number, showing an inert, resistant to acid and alkali, water and various organic solvents. Weather - plastic in the best aging life. High lubrication - is a solid material in the lowest coefficient of friction. Not adhere - is a solid material in the minimum surface tension, does not adhere to the material, the mechanical properties of any of its friction coefficient is extremely small Teflon PTFE membrane film specifications, only 1/5 of polyethylene cannula PTFE PTFE tube, which is an important feature of perfluorocarbon surface. Also, because the fluorine - intermolecular forces between the carbon chain is very low, so the PTFE has not sticky. Non-toxic - with physical inertia, as a long-term implantation of artificial blood vessels and organs of the body with no adverse reactions. Pure PTFE gasket selection of materials: PTFE powder, PTFE sheet using temperature: -150-250 ℃ Pressure: 6.4Mpa [Uses] high cleanliness medium for static sealing [specification] DN10-1600mm polytetrafluoroethylene Fluoride is a combination of Envelope Gasket asbestos rubber sheet or no asbestos and other upholstered pieces and Teflon-coated sheet from PTFE, V-type (cut type) PTFE Envelope Gasket PTFE plate by mechanical Turning made, U-shaped (fold-inclusive) PTFE Envelope Gasket PTFE tape edging by bonding together after heating. Both excellent corrosion resistance and good compression spring rate, widely used in various sealing acids, alkalis, strong oxidizing, chlorine and not allow contaminated media. Usually applied to the low pressure area. The main technical parameters: Pressure: ≤4.0MPa temperature: ≤260 ℃ Gasket coefficient: m = 2.5PH value: 0-14 minimum preload pressure ratio: y = 20MPa |
Admin>>>
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility