Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13597211
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
- home > Supply > Tetrafluoroethane pipe tetrafluoroethane tube resistant to acid, Texas PTFE, Tianjin three
Information Name: | Tetrafluoroethane pipe tetrafluoroethane tube resistant to acid, Texas PTFE, Tianjin three |
Published: | 2014-12-18 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Advantages tetrafluoroethylene tube: high temperature - long-term use temperature of 100 to 160 degrees; low temperature - at -100 degrees is still soft; corrosion - resistant to aqua regia and all organic solvents. Tetrafluoroethane pad PTFE gasket sheet known as PTFE gasket abroad or Teflon (PTFE) gasket. PTFE rods, tubes, plates or cut made by mechanical turning of flat gaskets, V-shaped pad tablets, piston rings, valve gaskets resistant to corrosion, anti-aging and non-conductive, good characteristics. 1) raw material preparation; Ingredients: pure F4 products, raw F4 fine resin PTFE, mashed, sift 2) mold preparation: clean with alcohol, no rust inside the die, no attachments 3) weighing, according to the formula G = PV (where G is feeding quantity, P is the preform density (2.18g / cm3) V for volume products) weighed. 4) feeding: the F4 resin is uniformly distributed throughout the press face. 5) preformed (pressing): According to the formula to calculate the press gauge rods tetrafluoroethane pipe tetrafluoroethane tetrafluoroethane pad, press gauge set. Pressed 6) Stripping Trimming: The semi-finished products removed from the mold, trimming its surface, its surface smooth, neat edge. Prepare molding. 7) Sintering: The semi-finished slowly put into a furnace Teflon PTFE molded plate rods, placed in a suitable amount, about one hour to heat up to 390 degrees, then incubated one hour tetrafluoroethylene rod tetrafluoroethylene film, about After molding began to cool, about four hours after arriving at the room temperature, make the finished baked finalize stereotypes. Tetrafluoroethane pipe tetrafluoroethane tube resistant to acid, Texas PTFE, Tianjin, Tianjin three by three plastic Limited. Three Plastic Co., Ltd. Tianjin (www.tjzssj.com) strong, credible, in Tianjin plastic plate (sheet, section), rods and other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Tianjin three and you work into the brilliant, for a better future! |
Admin>>>
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility