Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13597211
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Epoxy glue stick stick stick cloth cloth rod density _ _ Tianjin Zhuzhou three |
Published: | 2014-12-24 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Nylon products are treated in order to prevent and eliminate products or residual stress due to dimensional changes caused by moisture absorption. After the heat treatment method has two kinds of wet method and tone. a). The method of heat treatment is commonly used in mineral oil, glycerin, liquid paraffin high-boiling liquid, the heat treatment temperature should be higher than the average temperature of 10-20 ℃, the processing time varies depending on the wall thickness, the thickness of 3mm or less for 10-15 minutes and a thickness of 3-6mm time of 15-30 minutes, the heat treated article was slowly cooled to room temperature should be noted that, in order to prevent quenching caused by stress article regenerate. .. b) humidity conditioning treatment humidity conditioning treatment mainly for use environment humidity of the product carried out, which of two ways: a wet boiling tune, tune wet aqueous potassium diacetate (potassium acetate water ratio 1.25: 1 electric sticks bakelite cloth rods specific gravity, a boiling point of 121 ℃), boiling water wet simple adjustment, as long as the article is placed in an environment of 65% humidity, the amount of moisture can be allowed to equilibrate, but a longer time, The aqueous potassium acetate adjusted wet processing temperature 80-100 ℃ aqueous potassium acetate adjusted wet, the processing time depends mainly on the wall thickness, if the wall thickness is about 2 hours at 1.5mm, 3mm for 8 hours, 6mm for 16- 18 hours. Add a glass fiber nylon, toughening and other mechanical properties of blends. The results show that with increasing glass content, the tensile strength, flexural strength has greatly improved impact strength is more complex customized epoxy pipe bakelite cloth rod tube, toughening 加入布 rods, substantial toughness increase. Add 30% to 35% of glass fiber, 8% to 12% of the plasticizer, the best mechanical properties of the material. Epoxy glue stick stick stick cloth cloth rod density _ _ Zhuzhou provided by the Tianjin Tianjin Three Three plastic Limited. Three Plastic Co., Ltd. Tianjin (www.tjzssj.com) strong, credible, in Tianjin plastic plate (sheet, section), rods and other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Tianjin three and you work into the brilliant, for a better future! |
Admin>>>
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility