Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13597211
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Teflon PTFE density retail | Tianjin three (certified) | Teflon |
Published: | 2015-01-03 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Tetrafluoroethane pad at temperatures below -185 ℃. PTFE gaskets become brittle. Pure PTFE sealing gasket is a clean product tetrafluoroethylene Teflon tubing density, does not form a pollution density PTFE Teflon retail contact with any of its material, can be widely used in food, medicine other industries by mechanical turning or cut from flat gaskets, V-shaped gaskets, piston rings, ball washers and other corrosion-resistant, anti-aging and non-conductive and other good characteristics. Pure PTFE gasket selection of materials: PTFE powder, PTFE sheet using temperature: -150-250 ℃ Pressure: 6.4Mpa [Uses] high cleanliness medium for static sealing [specification] DN10-1600mm polytetrafluoroethylene Fluoride is a combination of Envelope Gasket asbestos rubber sheet or no asbestos and other upholstered pieces and PTFE-coated Teflon membrane sheets from hot rods tetrafluoride, V-type (cut type) tetrafluoroethylene clip package gaskets made from PTFE plate machinery turning, U-shaped (fold-inclusive) PTFE Envelope Gasket PTFE tape edging by bonding together after heating. Both excellent corrosion resistance and good compression spring rate, widely used in various sealing acids, alkalis, strong oxidizing, chlorine and not allow contaminated media. Usually applied to the low pressure area. The main technical parameters: Pressure: ≤4.0MPa temperature: ≤260 ℃ Gasket coefficient: m = 2.5PH value: 0-14 minimum preload pressure ratio: y = 20MPa density PTFE Teflon retail | Tianjin three (already Certification) | Teflon provided by Three Plastic Co., Ltd. of Tianjin. Plastic Co., Ltd. Tianjin three (www.tjzsxszp.com) is Tianjin, plastic plate (sheet, section), bar leaders, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum to meet customer needs. In Tianjin, the three leaders with the staff warmly welcome all inquiries negotiations to create Tianjin three a better future. |
Admin>>>
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility