Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13597211
- Product Categories
- Friendly Links
Information Name: | Polyethylene rod nylon rod specifications, nylon rods, Tianjin three |
Published: | 2015-03-20 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Nylon injection molding process is a relatively common nylon plate nylon rod diameter craft 100, produced by this process of nylon, its product quality is very good. Nylon injection molding process has a number of parameters, let's take a look at the injection temperature is an important factor affecting the injection pressure. POM rod manufacturers know the hardness of nylon rod, injection molding machine cylinder 5 to 6 heating section, each material has its proper processing temperature (details can be found in the data processing temperature material suppliers). Injection temperature must be controlled within a certain range. Polyethylene: white translucent solid density than water, with good electrical properties, the relative dielectric constant and dielectric loss is almost independent of frequency, and low coefficient of friction nylon rods, high chemical stability, resistant to moisture, cold fine nylon Stick resistant to weak acid weak base, but the softening temperature is lower, long-term working temperature should not exceed 70 ℃. Films made of polyethylene, are widely used in communication cables, high frequency cables and underwater cables and so do the conductor insulation. , Polyethylene rod nylon rod specifications, nylon rods, Tianjin, Tianjin three by three plastic Limited. Three Plastic Co., Ltd. Tianjin (www.tjzsxszp.com) strong, credible, in Tianjin plastic plate (sheet, section), rods and other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Tianjin three and you work into the brilliant, for a better future! |
Admin>>>
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 25469 visitor
Copyright © GuangDong ICP No. 10089450, Three Plastic Co., Ltd. in Tianjin All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility